Do you know that you can maintain your own aircon unit? Doing it yourself ensures that it runs efficiently and lasts longer too. While professional aircon servicing in Singapore is key, there are several maintenance hacks you can perform to keep your unit in top condition between professional services. These simple hacks can help you avoid costly repairs, and ensure a cool and comfortable home.
- 1. Clean the Indoor Unit Coils
- 2. Clean or Replace Air Filters Regularly
- 3. Check the Condensate Drain
- 4. Ensure Proper Ventilation
- 5. Adjust Temperature and Fan Speed Settings
- 6. Use a Timer
- 7. Close Windows and Doors to Keep the Cool In
- 8. Install Insulation to Improve Efficiency
- 9. Regular Professional Servicing
1. Clean the Indoor Unit Coils
In many HDB flats and apartments, the aircon’s indoor unit is more accessible than the outdoor unit. Over time, the coils inside the indoor unit can accumulate dust and dirt leading to the reduction of efficiency. To clean the coils, first turn off the aircon and unplug it from the main power point. Then, use a soft brush or vacuum cleaner with a brush attachment to gently remove the dirt and dust from the coils. This will help maintain efficient cooling and prolong the unit’s lifespan.
2. Clean or Replace Air Filters Regularly
One of the most important maintenance tasks is to clean or replace your air filters regularly. You’d be surprised to know that not many do this often or at all. It’s important to note that dirty filters can obstruct airflow, reduce efficiency, and strain the system. Plus, aircon filters that are filled with dust can also trigger allergies and cause you to fall ill.
For optimal performance, check your aircon filters every months and clean or replace them every two to three months. If you’ve pets or allergies, it’s advisable to do this more frequently. All you have to do is remove the filter, wash it with warm water (and mild detergent) to improve your aircon’s airflow. Clean filters not only improve air quality but can help reduce your electricity bills.
3. Check the Condensate Drain
The condensate drain removes moisture from your aircon to prevent water damage and keep humidity levels under control. However, it can sometimes get clogged with dirt or algae, leading to water leaks and increased humidity in your home. Inspect the drain regularly to make sure it’s clear. A good trick for DIY maintenance is to use a wet/dry vacuum to gently suck out any debris. If you notice any pooling water or foreign materials clogging the drain, take action immediately to avoid damage. This hack can prevent costly water damage and keep your indoor environment comfortable and healthy.
4. Ensure Proper Ventilation
Good airflow is essential for the efficient operation of your aircon. Make sure that your aircon is not obstructed by furniture, curtains, or other objects that can block airflow. Keeping the area around the aircon clear helps improve its performance and prevents it from overworking. Additionally, regularly cleaning the vents and ensuring they are open will help maintain proper airflow. For better ventilation, consider using a ceiling or oscillating fan to help circulate the cool air more evenly, reducing the need for the aircon to work overtime.
5. Adjust Temperature and Fan Speed Settings
Sometimes, optimizing your aircon can be as simple as adjusting the temperature settings. Running your aircon at a lower temperature requires more energy, but setting it to a slightly higher temperature (around 24-26°C) can help you save energy without sacrificing comfort. Use the fan mode when the room is already cool to circulate air and maintain the temperature. Setting your aircon to sleep mode or eco mode during the night can help cut down on energy consumption, keeping your home cool while saving you money.
6. Use a Timer
Setting a timer is an underrated yet effective way to optimize energy use. Instead of running your aircon non-stop, use a timer to switch it off once the room reaches a comfortable temperature. If you’re stepping out for a while, set a timer to turn the aircon off an hour before you leave. You can also set the aircon to start cooling just before you arrive back home. Using a timer not only reduces electricity consumption but also prevents unnecessary wear and tear on your unit.
7. Close Windows and Doors to Keep the Cool In
While it might sound obvious, closing doors and windows is essential to keep the cool air in and prevent the unit from overworking. If you’re cooling only a particular area, close off rooms that don’t need cooling. This reduces the area your aircon needs to cool, making it more efficient and allowing the room to cool down faster. Adding blinds or curtains to windows during the hottest parts of the day can also help block out heat, allowing your aircon to work more effectively
8. Install Insulation to Improve Efficiency
Insulation is another hack that helps trap cool air indoors, reducing the need for your aircon to work as hard. Installing insulation around windows and doors can prevent cool air from escaping and warm air from entering. Although it’s a small addition, proper insulation can make a significant difference in how efficiently your aircon cools the room. Consider insulating key areas, especially during the hotter months, for optimal performance and energy savings.
9. Regular Professional Servicing
Not forgetting the most important step, regular professional servicing. While DIY maintenance can help keep your aircon running smoothly, you still require the help of professionals to address more complex issues and perform a thorough cleaning. Schedule for an annual aircon servicing with a reliable aircon servicing provider in Singapore to deep clean your aircon units, check for potential problems, and upkeep it. Professionals also have the expertise and right tools to perform a comprehensive check and maintenance which can prevent major breakdowns and costly repairs.
Final Thoughts
By incorporating these DIY aircon maintenance hacks, you can ensure that your aircon system runs smoothly and remains in good condition for a long time. It also eases the load of the aircon servicing providers, allowing them to conduct their checks thoroughly. Regular maintenance not only extends the lifespan of your unit but improves its performance, saving you money on bills and repair costs. Keeping your aircon in top shape ensures a comfortable and cool home environment all year round.
Don’t forget, however, that some tasks are best left to professionals. Reliable aircon servicing in Singapore ensures your unit is thoroughly inspected and optimized for peak performance. With these DIY hacks and a little professional support, you can enjoy a comfortable, cool home without a hefty price tag.
You must be logged in to post a comment.